Windows 2000 USB2.0 Driver Installation Guide
==============================================
Introduction: 
-----------------
This driver only works with Intel ICH4 chipset & Windows 2000. 

Installation: 
-----------------
Note: You must go through all below procedures to complete the driver installation. 
 
1.  Click Windows [Start], then move the mouse to stay on [Settings].
2.  Click [Control Panel].
3.  Double Click [System].
4.  Click [Hardware] tab.
5.  Click [Device Manager].
6.  Right Click [Universal Serial Bus(USB) Controller] under [Other Devices], 
    then click [Properties].
7.  Click [Driver] tab.
8.  Click [Update Driver].
9.  Click [Next].
10. Choose [Search for a suitable driver for my device].
11. Click [Next].
12. Choose [Specify a location] under "Optional search locations".
13. Click [Next].
14. Click [Browse] to specify the file path where the driver is, 
    e.g. "X:\Drivers\USB2\2K\EHCI Package\"( X is the drive you put the support CD).
15. Click [Next].
16. Click [Finish].